B0125-V - 12 mm, 5-Axis Opposed Gang Tool CNC Lathe
Experience the Tsugami performance difference in this chucker convertible, CNC lathe, including simultaneous machining capability and 21 tool positions. Use the B0125-V for traditional 12 mm Swiss turning or for making parts smaller than 3:1 L/D ratio in chucker mode (optional conversion kit required).
Simultaneous Machining, 21 Tool, 5-Axis Swiss Turn
The B0125-V is a 12 mm, 5-axis chucker convertible Swiss built with Tsugami’s opposed gang type tool post and a rigid cast iron frame.
This Swiss CNC automatic lathe offers a total of 21 tool positions: 9 OD tool positions and 12 fixed tool positions (optional 2 rotary positions for rear) for flexible 5-axis machining. The B0125-V has 12,000 rpm main and sub spindle speeds. It also has front and back spindle simultaneous machining capabilities, a proven method for reducing cycle time.
The Tsugami B0125-V is CONVERTIBLE and may be run as a traditional sliding headstock Swiss Style Lathe using the guide bushing or run without the guide bushing with the addition of an optional chucker kit. When run in chucker mode, the turning center can use drawn bar stock instead of centerless ground stock, dramatically reducing remnant size and increasing shop flexibility.
Maximum Bar Stock | 0.5″ (12 mm) |
# Axes | 5 |
Sliding Headstock / Guide Bushing | YES |
CONVERTIBLE: Run w/o Guide Bushing (chucker) | YES |
Max Headstock Stroke w/ Guide Bushing Max Headstock Stroke w/o Guide Bushing |
6.79” (170 mm) 1.87” (45 mm) |
# Tool Positions |
21 |
# Live Tool Positions |
4 |
Control | FANUC 0i-TF |
Main Spindle Speed | 12,000 rpm |
Sub Spindle Speed | 12,000 rpm |
Live Tool Speed | 10,000 rpm |
Main Spindle Motor | 2.9/4.9Hp (2.2/3.7 kW) |
Weight | 3,968 Ibs. (1,800 kg) |
Footprint: W x D x H | 68.9” x 41.5” x 66.9” (1,750 mm × 1,055 mm × 1,700 mm) |
- Increased Back Spindle Capability – Spindle plus 8 fixed and rotary tools for simultaneous machining
- 21 Total Tool Positions – 9 OD and 4 fixed front, 8 fixed rear or 6 fixed and 2 rotary (option)
- Back Milling Operations – off-center drilling/tapping and end milling may be performed simultaneously with main spindle (option)
- Rapid Traverse Rate of 32 m/min– Shortens idle and cycle times
- Enriched NC Functions Standard – tool nose radius compensation, chamfering and corner rounding and cutoff detection, plus many more…
- Fanuc 0i-TF CNC Control
Chucker Kit