B075 - 7 mm, 5-Axis Opposed Gang Tool Lathe

Experience the Tsugami performance difference in an economically priced, enhanced 5-axis convertible opposed gang tool lathe. Use the B075-III for traditional 7mm Swiss style manufacturing or for making parts smaller than 3:1 L/D ration in chucker mode (optional conversion kit needed).

Legendary Tsugami Precision, 15,000 rpm Main Spindle

The B075-III uses the same rugged framework as B0125-III but enables micro machining with higher spindle rpm capability. This 5-axis machine has back spindle capabilities along the Z2-axis and is able to eliminate many secondary operations. This convertible Swiss style lathe features a very high speed main spindle (15,000rpm) and sub spindle (12,000rpm). High speed is essential for precision in micro-machining small parts.

In this model, the toggle is replaced with Tsugami’s unique chuck mechanism which provides exceptional balance and improved roundness. Ceramic ball bearings contribute to a stable surface finish and increased tool life.

Also economically priced like other B0 machines, the B075-III does feature Tsugami’s gang type tool post, rigid cast iron structural base, 12,000 rpm main and sub spindle speed and offers a maximum total of 21 tool positions for flexible 5-axis manufacturing. A large capacity chip pan enables unmanned operation for long periods.

The B075-III is CONVERTIBLE and may be run as a traditional sliding headstock machine using the guide bushing or run without the guide bushing with the addition of an optional chucker kit. When run in chucker mode, the machine can use drawn bar stock instead of centerless ground stock, dramatically reducing remnant size and increasing shop flexibility.

Maximum Bar Stock .275″ (7mm)
# Axes 5
Sliding Headstock / Guide Bushing YES
CONVERTIBLE: Run w/o Guide Bushing (chucker) YES
Max  Headstock Stroke w/ Guide Bushing 2.76″ (70mm)
# Tool Positions 21 Max
# Live Tool Positions 4 Max
Control FANUC 0i-TF
Main Spindle  Speed 15,000 rpm Max
Sub Spindle Speed 12,000 rpm Max
Main Spindle Motor  2hp (1.1/1.5kW)
Sub Spindle Motor 3 hp (2.2/2.5kW)
Weight 4,409 lbs. (2,000kg)
Footprint:  W x D x H 65”  x 44” x  67” (1,035× 1,585  × 1,700mm)


  • Enhanced 5-axis Swiss Style Lathe at minimal investment cost
  • Unique Toggle, Ceramic Ball Bearings improve balance, roundness, surface finish and tool life
  • 4 Fixed Tool Positions for the Sub Spindle
  • 21 Total Tool Positions Max
  • 70mm Stroke Direct Drive Rotary Guide Bushing
  • Rapid Traverse Rate of 32M/min – shortens idle and cycle times
  • Enriched NC Functions Standard – tool nose radius compensation, chamfering and corner rounding, and cutoff detection, plus many more…
  • Fanuc 0i-TF CNC
  • Cross Rotary Tool
  • “Chucker” Kit
  • Direct-Drive Guide Bushing
  • C-axis
  • Cross Rigid Tap

More About This CNC Machine

Want to find out more about this or another Tsugami product or solution? Contact us today to get a quote or arrange for a conversation about your manufacturing needs.